Polzeath Posted August 12, 2012 Share Posted August 12, 2012 (edited) No doubt a easy question, but it's eluding my simple brain. I have tried a method described elsewhere whereby you reduced the canvas size to say 95% then increase it by 105%, but the problem with this is that it doesn't create a border of equal width. The sides of a landscape orientated rectangular image end up being thicker than the top and bottom. Is there a simple method for obtaining a border of equal thickness? Thanks Edited August 12, 2012 by Polzeath Link to comment Share on other sites More sharing options...
jim100361 Posted August 12, 2012 Share Posted August 12, 2012 (edited) You could always use the line tool, adjust it to the desired thickness and draw four lines along the border of your canvas. EDIT: If you're having too much difficulty of simply drawing it on the very edges (not close enough or partially cut-off), draw your line on a separate layer and then move the layer to the edge so it lines up nicely with it. By doing each line in this manner, you should be able to get what you desire. Edited August 12, 2012 by jim100361 Link to comment Share on other sites More sharing options...
yellowman Posted August 12, 2012 Share Posted August 12, 2012 The fastest way is to use either Borders N' Shapes or Outline Selection or OutineSelection plugins, But if you don't want to use plugins, then you need to reduce the Canvas size by same amount of pixels for the Width and Height, then enlarge it to the original size. 1 My GalleryMy YouTube Channel "PDN Tutorials" Link to comment Share on other sites More sharing options...
Polzeath Posted August 12, 2012 Author Share Posted August 12, 2012 Am I correct in thinking that with all these methods, the border is masking parts of the image? Is there a way to create a border without losing any of the image itself? Cheers Link to comment Share on other sites More sharing options...
jim100361 Posted August 12, 2012 Share Posted August 12, 2012 You could expand the canvas and change the surrounding border. Go to the menus and the option should be under "Image". Link to comment Share on other sites More sharing options...
minners71 Posted August 13, 2012 Share Posted August 13, 2012 You could use part of the image as the border it can produce some great effects, think there was a tut about it somewhere. 1. On your image layer use the rectangle selection tool and select an area inside your image. 2. Use the white arrow ( move selection ) on the nubs of the selection and use the arrow keys on the keyboard to move it so that it is 10px smaller than your image all the way round. 3. Press ctrl+I to invert your selection then ctrl+C to copy it then open a new layer and press ctrl+V to paste it. 4. Double click on this layer to open the layer blending window and change the blending mode. Link to comment Share on other sites More sharing options...
Ego Eram Reputo Posted August 13, 2012 Share Posted August 13, 2012 Simon Brown's Extend Border ebook: Mastering Paint.NET | resources: Plugin Index | Stereogram Tut | proud supporter of Codelab plugins: EER's Plugin Pack | Planetoid | StickMan | WhichSymbol+ | Dr Scott's Markup Renderer | CSV Filetype | dwarf horde plugins: Plugin Browser | ShapeMaker Link to comment Share on other sites More sharing options...
Taff Posted November 6, 2022 Share Posted November 6, 2022 Select your Image. and then into Resize record the image dimensions. then come out of resize image and select resize canvas canvas size This should bring up the same screen as above but now you’re going to define the Canvas size, as we are going to use the canvas to create the keyline or border. If you want, lets say a 10 pixel keyline (border) then you need to add 2x10 (20 pixels) to both the length and width and that’s it. Change the two values for length and width and away you go. Link to comment Share on other sites More sharing options...
Pixey Posted November 6, 2022 Share Posted November 6, 2022 Hi @Taff and welcome to the forum We don't like to reply to old threads (this one is 10 years old) as per the RULES #11. But thank you for your input anyway. 1 How I made Jennifer & Halle in Paint.net My Gallery | My Deviant Art "Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon. Link to comment Share on other sites More sharing options...
Recommended Posts