highstream Posted January 27, 2020 Share Posted January 27, 2020 I have a "full page" pdf that when converted online to a jpg comes out as only using part of the page, something I hadn't come across before. I would like to make the jpg full page size. Any ideas how to do this, if it can be? Thanks, Quote Link to comment Share on other sites More sharing options...
AndrewDavid Posted January 27, 2020 Share Posted January 27, 2020 Hello @highstream Welcome to the forum Using the Magic Wand tool - set the tolerance to 15 and select the white area around your pic. Invert the selection and copy. Add new layer and paste image. Do not deselect. Holding the shift button, move the bottom right nub of the selection to the bottom right corner of the canvas and you will enlarge the image while maintaining aspect ratio. Hope this helps. Quote Link to comment Share on other sites More sharing options...
highstream Posted January 27, 2020 Author Share Posted January 27, 2020 Thanks. Will give it a try later. Quote Link to comment Share on other sites More sharing options...
IHaveNoName Posted January 28, 2020 Share Posted January 28, 2020 Maybe I've misunderstood the problem but I'm not sure why the OP used an online converter. With Adobe Reader (Free) you can extract any image yourself - right click and use Select Tool, then outline the image area you want and use the Copy option to copy it to you clipboard. You can then open it in PDN and save the image in whatever format you want. With Sumatra PDF, which can be downloaded as both an install-able or a portable versions, it is even simpler. Just right click on the image and you'll get a copy option which again copies to the clipboard which can be used in the same way. Quote Link to comment Share on other sites More sharing options...
highstream Posted January 28, 2020 Author Share Posted January 28, 2020 (edited) I'm stuck after Add new layer and paste image, which I took to mean "Paste Into New Image" under Edit. Tried twice and it automatically seems to deselect the highlighted area. Here's a screenshot of where I'm at: Edited January 28, 2020 by highstream Quote Link to comment Share on other sites More sharing options...
HyReZ Posted January 28, 2020 Share Posted January 28, 2020 (edited) If you attempted to use the free Adobe Acrobat DC and the great solution submitted by IHaveNoName, you should use the 'new' image option rather that the 'add a new layer'. When you use the New image option in Paint.NET, you create a 'new' work space of the dimensions of the copied image, which you now should pasted into. Edited January 28, 2020 by HyReZ Quote Link to comment Share on other sites More sharing options...
AndrewDavid Posted January 28, 2020 Share Posted January 28, 2020 It looks like you missed the copy step as well. That's why you are seeing transparency. Ctrl - C to copy the inverted selection Then use Ctrl-V - Never mind the Edit menu. Quote Link to comment Share on other sites More sharing options...
highstream Posted January 28, 2020 Author Share Posted January 28, 2020 (edited) 4 hours ago, HyReZ said: If you attempted to use the free Adobe Acrobat DC and the great solution submitted by IHaveNoName, you should use the 'new' image option rather that the 'add a new layer'. When you use the New image option in Paint.NET, you create a 'new' work space of the dimensions of the copied image, which you now should pasted into. I don't use Acrobat and I'm not sure where it fits in this. I will go back and try IHaveNoName's steps again tomorrow. Thanks, Edited January 28, 2020 by highstream Quote Link to comment Share on other sites More sharing options...
HyReZ Posted January 28, 2020 Share Posted January 28, 2020 (edited) 41 minutes ago, highstream said: I don't use Acrobat and I'm not sure where it fits in this. You are aware that a PDF is an Adobe Acrobat document file? PDF stands for Portable Document Format that was developed by Adobe in the 1990's.IHaveNoName mentioned using Adobe Acrobat Reader as part of his above comment.Since you are trying to copy an image from an Adobe PDF file, I thought that using a free version Adobe Acrobat DC Reader and explaining how to us it to bringing to the clipboard so that us the steps I provided to use it in Paint.NET would be useful for you. Edited January 28, 2020 by HyReZ Quote Link to comment Share on other sites More sharing options...
TrevorOutlaw Posted January 28, 2020 Share Posted January 28, 2020 12 hours ago, highstream said: I have a "full page" pdf that when converted online to a jpg comes out as only using part of the page, something I hadn't come across before. I would like to make the jpg full page size. Any ideas how to do this, if it can be? Thanks, The easiest way would be to use the selection tool, rectangle select, and draw a box around the image you have. Then use the crop tool. 1 Quote Link to comment Share on other sites More sharing options...
cornemuse Posted February 3, 2020 Share Posted February 3, 2020 Can you view/see the complete portion of what you want on your computers screen? (use ctrl + or -). Use/hit 'Print-Scrn', in PNet, 'paste', tool = rectangular select, copy, new, paste, save as "", walla! I save lots of 'cartoons' & many do not allow 'save image as', sooo, print scrn, (I have pdn arise from the depths with 'on my computer' = F8), paste etc, etc, , , Quote 'Where's my plinth?' Link to comment Share on other sites More sharing options...
HyReZ Posted February 3, 2020 Share Posted February 3, 2020 (edited) 5 hours ago, cornemuse said: , walla! It is 'voilà', it is French for 'here (it is)'. Edited February 4, 2020 by HyReZ Quote Link to comment Share on other sites More sharing options...
cornemuse Posted February 4, 2020 Share Posted February 4, 2020 Well, excuse me, , , , , Quote 'Where's my plinth?' Link to comment Share on other sites More sharing options...
HyReZ Posted February 4, 2020 Share Posted February 4, 2020 That's okay. Now you know and can move forward with improved understanding. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.