Jump to content

How can I make My Penguin App Logo in Paint.Net?


Recommended Posts

So I just wanted to know to make the Club Penguin #My Penguin App Logo in Paint.Net?

The font looks something like this:

sketch10133835_by_bandage23-d7kkgr0.jpg

The name of the font is Burbank Big Wide Bold

I want the text: "Frosty Club Penguin Guide" in the my penguin app font!So can you please explain me the steps with pics?

Thank you!:)

I'm a Club Penguin Graphic Designer!Nice to meet you!:)

Link to comment
Share on other sites

Hello Bandage and Welcome to PDN.  I hope I can help you with a few pictures.  I think you already have the text picked out, so here are the steps:

 

Make you first layer the color you want, or put in a picture you want to have underneath the project.

Using the Select Ellipse Tool :EllipseSelectTool:  and holding down Ctrl, make big swirls on a New Layer.  The swirls will co-join to make a large bubble.

http://i.imgur.com/y61hW1c.png

 

Fill the bubble with color and use Effects - Object - Drop Shadow

Make a New Layer and put in your text in white.

Make another New Layer for the Color.

Go back to the text layer and use the magic wand :MagicWandTool:  to select the white text, change your colors in the color window and make primary and secondary different colors :Colors: , then go to the color layer and use the Gradient Tool :GradientTool:  to fill the text.


http://i.imgur.com/Qh8tfJV.png

 

 

I hope this is what you wanted bye.gif    

  • Upvote 2

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

I achieved this: 

auzCDIk.png

 

Steps;

 

#1 - On a new layer, I typed the text in white with the Candara font.

#2 - Duplicated the layer.

#3 - On the new layer, I added a Curves adjustment [Ctrl+Shift+M], changed the Transfer Map to RGB, deselected Green and Blue and pulled the Red to the bottom-right corner. This makes the text fully Teal.

#4 - Add a Hue/Saturation adjustment [Ctrl+Shift+U] and changed the Hue to 42, and the Saturation to 64.

#5 - Moved that layer below the first one.

#6 - Using the Move Selected Pixels tool [M], I clicked on the bottom layer and moved the text up 4 and 3 left.

#7 - Merged the 2 text layers.

#8 - Applied an Outline Object effect with these settings;

 

Width:          7

Softness: 171

Colour

R: 68

G: 165

B: 255

 

#9 - Duplicated the layer.

#10 - Applied a Brightness/Contrast adjustment [Ctrl+Shift+T] and changed the brightness to -88.

#11 - Move the new layer below the original.

#12 - Using the Move Selected Pixels tool again, I moved the new layer up 3 pixels, and to the left 3 pixels.

#13 - Flattened the layer.

 

 

Hope this helped.

  • Upvote 2
Link to comment
Share on other sites

I achieved this: 

auzCDIk.png

 

Steps;

 

#1 - On a new layer, I typed the text in white with the Candara font.

#2 - Duplicated the layer.

#3 - On the new layer, I added a Curves adjustment [Ctrl+Shift+M], changed the Transfer Map to RGB, deselected Green and Blue and pulled the Red to the bottom-right corner. This makes the text fully Teal.

#4 - Add a Hue/Saturation adjustment [Ctrl+Shift+U] and changed the Hue to 42, and the Saturation to 64.

#5 - Moved that layer below the first one.

#6 - Using the Move Selected Pixels tool [M], I clicked on the bottom layer and moved the text up 4 and 3 left.

#7 - Merged the 2 text layers.

#8 - Applied an Outline Object effect with these settings;

 

Width:          7

Softness: 171

Colour

R: 68

G: 165

B: 255

 

#9 - Duplicated the layer.

#10 - Applied a Brightness/Contrast adjustment [Ctrl+Shift+T] and changed the brightness to -88.

#11 - Move the new layer below the original.

#12 - Using the Move Selected Pixels tool again, I moved the new layer up 3 pixels, and to the left 3 pixels.

#13 - Flattened the layer.

 

 

Hope this helped.

I'll try it thanks!:)

I'm a Club Penguin Graphic Designer!Nice to meet you!:)

Link to comment
Share on other sites

Hmmm...but it doesn't look exactly like this :

My_penguin_font_example_Penguin-Pal.png

 

Oh dear - sorry.  Just proves my age ............ as I had NO idea what a Penguine App Logo looked like smiley-ashamed001.gif 

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

It looks great - well done smiley-gen014.gif  

 

I would suggest, if you still have the PDN, that you use the Feather Plugin to soften the edges, or, better still AA's Assistant found here

  • Upvote 1

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

It looks great - well done smiley-gen014.gif  

 

I would suggest, if you still have the PDN, that you use the Feather Plugin to soften the edges, or, better still AA's Assistant found here

ok so I install A A'$ Assistant and applied it

But still see does edges!: :(

med_gallery_137778_1514_21052.png

I'm a Club Penguin Graphic Designer!Nice to meet you!:)

Link to comment
Share on other sites

I was able to smooth the text on the outside of your Penguin text, by first using Bolt Bait's Feather v2.3 Feather Plugin (found here) at default and by checking the box 'True Feather', then using the AA's Assistant at default ................

 

C1G63yf.png

 

But, you will also have to do those same steps on the "white" text before you add the outline...... which obviously I can't get at becasue you've already flattened the text.

I hope this helps ;)

Edited by Pixey
  • Upvote 2

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

I was able to smooth the text on the outside of your Penguin text, by first using Bolt Bait's Feather v2.3 Feather Plugin at default and by checking the box 'True Feather', then using the AA's Assistant at default ................

 

C1G63yf.png

 

But, you will also have to do those same steps on the "white" text before you add the outline...... which obviously I can't get at becasue you've already flattened the text.

I hope this helps ;)

ok thnx :)

I'm a Club Penguin Graphic Designer!Nice to meet you!:)

Link to comment
Share on other sites

You are very Welcome :D .  Here is how I made an attempt at your text.

 

AbdQGjB.png

 

1. Make your text and duplicate x 3.

2. On Layer 3 add a dark drop shadow - twice - then Feather (+ True feather) and then AA's Assistant.

3. On Layer 2 Outline Object at #10 then use Outlinie Object in Blue and Feather and AA's

4. On Layer 1 move this to the top of the Layers and use the Selection Tool to select all the letter - then make a New Layer and use Gradient Fill with white and 

    light blue and lower the opacity.

5. Go to layer 2 and use Drop Shadow - play with offset X & Y and then finally use AA's Assistant and Flatten.

 

 

http://i.imgur.com/z6zlK5J.png

I hope this helps.

  • Upvote 2

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

You are very Welcome :D .  Here is how I made an attempt at your text. AbdQGjB.png 1. Make your text and duplicate x 3.2. On Layer 3 add a dark drop shadow - twice - then Feather (+ True feather) and then AA's Assistant.3. On Layer 2 Outline Object at #10 then use Outlinie Object in Blue and Feather and AA's4. On Layer 1 move this to the top of the Layers and use the Selection Tool to select all the letter - then make a New Layer and use Gradient Fill with white and     light blue and lower the opacity.5. Go to layer 2 and use Drop Shadow - play with offset X & Y and then finally use AA's Assistant and Flatten.   http://i.imgur.com/z6zlK5J.png I hope this helps.

Thnx Pixey!:D your the best!

But I can't install the drop shadow thing :(

I'm a Club Penguin Graphic Designer!Nice to meet you!:)

Link to comment
Share on other sites

OK - Try this for the link to the Drop Shadow here

 

You must then unzip it and choose the Drop Shadow dll and put it into The Effects folder in Paint.NET.  Do you know how to do that?  Go to Computer - Programme Files - Paint.NET - Effects and then drag the dll into that folder.

 

Good Luck :)

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

OK - Try this for the link to the Drop Shadow here

You must then unzip it and choose the Drop Shadow dll and put it into The Effects folder in Paint.NET. Do you know how to do that? Go to Computer - Programme Files - Paint.NET - Effects and then drag the dll into that folder.

Good Luck :)

the page isn't opening :'(

I'm a Club Penguin Graphic Designer!Nice to meet you!:)

Link to comment
Share on other sites

It's opening fine for me .............. I don't know why it wouldn't for you?  You may have an internet problem right now.

 

Try going to Plugin Index - Alphabetical List 'D'

Look for the drop down

Show

Scroll down to Drop Shadow by KrisVDM

 

:|

30b8T8B.gif

How I made Jennifer & Halle in Paint.net

My Gallery | My Deviant Art

"Rescuing one animal may not change the world, but for that animal their world is changed forever!" anon.

 
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...