Chip Posted January 5, 2018 Share Posted January 5, 2018 (edited) I know this has to have been asked before, I am pretty self sufficient at learning this type of things but I have been trying to figure out what the Fill tool (pictured) is properly used for and in all my searches for fill comes up with how to use the paint bucket. I have played with it a little but I have not had a use for it just used the way it is, by clicking one of the choices. I think I may have a use for it if I can figure out how to do it. I am restoring a picture that has been water damaged (the hard copy) and in it is a guitar with a type of pearl flakes or metallic flakes in the paint, I was thinking if I used a percent, like the 25 percent I could do this. The only other option I know of is to match the base color of the guitar and go back over it with the pencil with the pearl color and click 1 pixel at a time until I get the desired results, 4 hrs later, lol. Can that be done with this tool? If not what is it used for? I just thought of something this second, is this tool meant to be used with layers? Thank you - Chip Edited January 5, 2018 by Chip Forgot to thank and sign Quote Link to comment Share on other sites More sharing options...
MadJik Posted January 5, 2018 Share Posted January 5, 2018 Hi Chip and welcome to the forum. It's difficult to see what you are talking about without a picture. Have you tried the clone stamp tool? Quote My DeviantArt | My Pictorium | My Plugins | Donate via Paypal Link to comment Share on other sites More sharing options...
AndrewDavid Posted January 5, 2018 Share Posted January 5, 2018 Hi @Chip Welcome to the forum. Posting a pic always helps see what you are trying to accomplish . Here's an example of what I think you want to do. http://www.simscustomshop.com/metal-flake-fender-telecaster If I am correct look for a tutorial that will give you that kind of effect or something close. The first one that comes to mind is This will lead you in the right direction. Your question about the drop down fill menu is used for creating patterns that can be textured in so many ways. I don't think it would help you in this matter. The tut should show you what I mean. Noise (another plugin) is I think best suited to the effect you are looking for. Quote Link to comment Share on other sites More sharing options...
IRON67 Posted January 5, 2018 Share Posted January 5, 2018 (edited) My personal advice - because the available fill-pattern are in my eyes to much regular or homogen - is another way. Select the area which you want to change, paste it in a new layer (at the same location) and then try add noise or grain with minimum of color saturation. Then you can choose a desired blending mode (layer options) and opacity. Possible result (left side original, right side with grain): Edited January 5, 2018 by IRON67 2 Quote Link to comment Share on other sites More sharing options...
Chip Posted January 17, 2018 Author Share Posted January 17, 2018 (edited) Sorry for the delay, I guess I missed the email. A picture, of course. This is the guitar, it was heavily damaged so most of the "pearl" is gone. I think I will do like Iron67 said, I don't know why I didn't think of that, I have done it before, using the eraser to erase where I don't want it. It doesn't have to be perfect, it's just a picture of me about 35 years ago, lol, it will look a lot better. I will post the original damaged photo as well. Thanks for the responses, I still have quite a bit of work to do on it but here it is. Edited January 17, 2018 by Chip Quote Link to comment Share on other sites More sharing options...
IRON67 Posted January 17, 2018 Share Posted January 17, 2018 (edited) BTW: In my opinion the pearl effect on this image is not as important to make visible as a better color saturation und correction. Something like that: Edited January 17, 2018 by IRON67 2 Quote Link to comment Share on other sites More sharing options...
Chip Posted January 18, 2018 Author Share Posted January 18, 2018 Yeah I was going to get around to doing that but I wanted to clear it up from the damage first, so did I do it backwards? Fix the color first then touch up the rest? Did you notice that the jean pattern is the same on both legs? That's why I don't know why in the world I didn't just do the same for the guitar, lol. Quote Link to comment Share on other sites More sharing options...
IRON67 Posted January 18, 2018 Share Posted January 18, 2018 (edited) Sure, first repair the damage. I don't know the real resolution of the (scanned?) original photo now and only want to say, that such a minor detail like "pearl effect" maybe isn't so important. Edited January 18, 2018 by IRON67 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.