old banshee

Thankyou, Thankyou, Thankyou. Frank.

Guys this has been a fantastic plugin, however I upgraded my windows to the latest version and scriptlab is not working anymore. I try to run a saved script but all that happens is a loading bar runs at the bottom of the screen. You can see this at the bottom right of image 1. When I hit cancel image two pops up. The third image is the error details. The forth image is my update history. Please help me. Frank

This is what I have. Thanks for the reply.

Is there a limit to the amount of layers you can have in an image? Cheer's guys. Frank

Reptillian, did you get the PM?

PM sent.

And the reason why I want to do this for those interested is I need to fill shapes with other shapes. Thanks for all your help, Frank

Ok Here is what I want to do I should have posted this before. The image shows all the areas with letters in so you can see the shapes that are the same. Take A for instance, if I wanted to select all the A shaped areas one would use the magic wand tool and select all the spaces marked A holding the ctrl key down as one does so. On could then fill all the shapes with a colour and then one would be able to select all the A spaces by colour with the magic wand. What I was asking was could I select all the A areas by there shape without colouring the spaces or selecting the areas one at a time. Thanks again for all you responses. Frank

Ok thanks guys. I will have to look for a work around.

Sorry what is vector apps? Thanks for the reply.

Hey guys, is there any way of select areas by shape. I know you can use the magic wand and select the same colour in an image but I want to select the same shape from an image. An example would be triangles, circles, rectangles, squares, diamonds and the likes. All the best, Frank

Thankyou sooo much. Frank

Is it possible or is there a plugin that carries out repetitive tasks for you? Take for example I have an image/png I want the black removed then the red removed, then I want to feather the image twice at 10, jitter the image to say 10,10,10,10, 45. Then feather by 5. I have to repeat this on various numbers pngs. It would be nice to do it with one or two clicks. This may be totally impossible but I have to ask. Frank(old banshee).

I created an image and saved it as a png I also saved it as an 8bit bmp. When I try to load it I get the following message. I is a large file 900 mb. Any ideas? System.ArgumentException: Parameter is not valid. at System.Drawing.Image.FromStream(Stream stream, Boolean useEmbeddedColorManagement, Boolean validateImageData) at PaintDotNet.Data.BmpFileType.OnLoad(Stream input) in D:\src\pdn\src\PaintDotNet\Data\BmpFileType.cs:line 95 at PaintDotNet.FileType.Load(Stream input) in D:\src\pdn\src\Data\FileType.cs:line 496 at PaintDotNet.Functional.Func.Eval[T1,TRet](Func`2 f, T1 arg1) in D:\src\pdn\src\Base\Functional\Func.cs:line 158 Frank

Thanks guys and gals for all your input. It has been very helpful. Frank

Here is something for you just to say thank you for all your suggestions. https://krikienoid.github.io/flagwaver/ It is a waving flag. You can even place your own design on it then snapshot an image of it. May come in handy to some of you. Old Banshee

Pixey, Imagine if there were bits missing from the rivers How would you replace them without copy and pasting them?

What is Zenith POV?

Pixey, the alignment issue is caused by elevations. The map may have up to 15 height levels. Now the image that has the missing segments is as it is when I generate the map with all the elevations the gaps represent when the river goes behind a hill and cannot be seen. I want all sections of the river showing. I can do this by generating the river map with only 1 elevation then it all comes out visible and flat. The problem with doing that is there is a big discrepancy between the river on elevation/level 1 and the one on elevation/level 15. This is when I have to move around and place the sections where I want. That is very time consuming. What I am after is to have the original river image which is in the correct position to have the segments which are missing added. I want to be able to do this as quickly as possible with as least amount of clicks as possible. Something along the lines of drop shadow which only takes seconds to do a whole map. Thanks for the replies. They are very informative. Old Banshee

The Hex grid looks good I may be able to use it. But if not it will come in very handy for other things. Thank you. Madjik.

David, here is a little program and it is free it allows you to record screen images or videos. https://icecreamapps.com/Screen-Recorder/ Old Banshee.

Another thing is, could the image use hexes or rectangles instead of squares? Old Banshee.

TileWorld looks like it has potential for what I need. Now if I could number the squares and have the plug-in place the contents of a the square into the image that would be it. What I am saying is / = 1 \ = 2 -- = 3 | = 4 The symbols would be the river sections and the number would represent that shape. Then I could load 134213421342141 now this would work up to 9 then use an abcdefg for numbers 10 and upwards. What are the chances of that happening? Thanks guys.

Not sure I get what you mean any chance of a video capture of what you are doing? Sorry to be such a pain. At the moment I am moving and stretching the blue rivers into the position of the red rivers. Takes about 2 to 3 hours per image. Old Banshee. Really appreciate you taking the time to reply.

Hi, The original is generated by a map editor but the rivers disappear when they go behind hills. I have flattened the terrain in the map editor so the rivers join up but they are out of the original position and I have to be manually position them. I use layers. I want the rivers to follow the hex lines if possible. Below is an example of a map I am working on. Thanks for the reply. Old Banshee.