-
Posts
7 -
Joined
-
Last visited
Posts posted by velociraptori
-
-
nice tut... heres my picture:
Hidden Content:i think it came out pretty well
=)
-
Okay, heres my little picture:
Hidden Content:This picture is probably my best picture i have drawn...
The picture on the back is the flag of Finland... Just for my fun
Heres my another picture; i don't know where to post it so i decided to post it on here:
Hidden Content:This picture was completely from my mind and it makes no physical sense...
Well, i think im pretty much done with my pics,hope you comment on them =)
-
I put mine on someones necklace =)
Heres the picture:
Hidden Content: -
Does anyone like my sig...?:
-
Ok, heres mine =)
Hidden Content:You can probably see most of it is faked =)
-
Here's my little Palette: =)
It has normal colors with transparent version of them, also, a greyscale with transparent version of it, too!
Spoiler; Paint.NET Palette File ; Lines that start with a semicolon are comments ; Colors are written as 8-digit hexadecimal numbers: aarrggbb ; For example, this would specify green: FF00FF00 ; The alpha ('aa') value specifies how transparent a color is. FF is fully opaque, 00 is fully transparent. ; A palette must consist of ninety six (96) colors. If there are less than this, the remaining color ; slots will be set to white (FFFFFFFF). If there are more, then the remaining colors will be ignored. FF000000 FFFFFFFF FFFF0000 FF00FF00 FF0000FF FFFFFF00 FF00FFFF FFFF00FF 80000000 80FFFFFF 80FF0000 8000FF00 800000FF 80FFFF00 8000FFFF 80FF00FF FFFF8000 FF8000FF FF800000 FF008000 FF000080 FF808000 FF008080 FF800080 80FF8000 808000FF 80800000 80008000 80000080 80808000 80008080 80800080 80000000 80050505 800A0A0A 80141414 801E1E1E 80282828 80323232 803C3C3C 80464646 80505050 805A5A5A 80646464 806E6E6E 80787878 80828282 808C8C8C 80969696 80A0A0A0 80AAAAAA 80B4B4B4 80BEBEBE 80C8C8C8 80D2D2D2 80DCDCDC 80E6E6E6 80F0F0F0 80FAFAFA 80FBFBFB 80FCFCFC 80FDFDFD 80FEFEFE 80FFFFFF FF000000 FF050505 FF0A0A0A FF141414 FF1E1E1E FF282828 FF323232 FF3C3C3C FF464646 FF505050 FF5A5A5A FF646464 FF6E6E6E FF787878 FF828282 FF8C8C8C FF969696 FFA0A0A0 FFAAAAAA FFB4B4B4 FFBEBEBE FFC8C8C8 FFD2D2D2 FFDCDCDC FFE6E6E6 FFF0F0F0 FFFAFAFA FFFBFBFB FFFCFCFC FFFDFDFD FFFEFEFE FFFFFFFF
How to make a Glass of Wine
in Tutorial Graveyard
Posted · Edited by velociraptori
Hello!
In my first tutorial im going to show you how to make a glass of wine. In this tutorial you need the following plugins:
Shape3D
Bevel Selection
Quadrilateral Reshape
The finished picture will look like this:
So heres how to do it:
1.Open a new picture, 800x600 pixels, then put some gradient on the background:
2.Add a new layer, name it Head, fill it with transparency 85 white:
3.New layer, name it Head Highlight, and draw some white rectangles on the side:
4.Now use gradient with transparency mode to fade out the top and the bottom of the lines:
5. On the Head layer, apply Shape3D with these settings:
6. On the Head Highlight, apply Shape3D with same settings except turn the lighting OFF, and the Move Y to 0.600:
7. Use Gradient with Transparency mode to get the excess highlighting off:
8. Merge Head and Head Highlight layers together.
9.New layer, name it Wine, Go back to Head layer, use Magic Wand (Tolerance 25%) and press Ctrl+I, go back to Wine layer and fill the cup with red color:
a.
b.
10. Delete some of the wine. It's up to you how much wine do you want:
11. It's getting a bit tricky now but read carefully:
11a. Select E60000 as your color, and make a new layer called "Ellipse"
11b. Choose Ellipse Tool
11c. Make Sure the ellipse tool is drawing outlines only and Antialialising is Disabled
11d. On the Ellipse layer, draw an ellipse that matches the ellipse that is on the glass: if it doesn't fit, choose it with rectangle select and scale it.
Ignore that i accidently put the ellipse on the wine layer on that picture
11e. Now choose Magic Wand (Tolerance 65%) and click that ellipse.
11f. Now move the ellipse down so the widest part of it is on the surface of the wine: Scale it bit thinner if its a bit too large...
11g. Merge Wine and Ellipse layers together. 11h. Fill the space between ellipse and wine with red color:
12. Use the magic wand and select the outside of wine. Then press Ctrl+I and use Effects > Selection > Bevel Selection and use it with these settings:
13. Nothing for here because 13 is unlucky number
14. Move Wine layer down:
15. Create New Layer, Name it Body, and fill it with white (Transparency 85)
16. Apply Shape3D with these settings:
17. Create New layer, Body Highlight, put in White rectangles (See step 3.) and blur them (See Step 4.)
18. Apply Shape3D with same settings that are in Body, Except Disable Lighting (See Step 6.) and Move Y to -0.750 (and if you like you can put Move X to 0.010)
19. Merge Body Highlight and Body together
20. Create new layer, name it Base, and fill with white (Transparency 85...)
21. Create another layer, name it Base Highlight and do the white rectangles (See steps 3 and 4)
22. On the Base layer, apply Shape3D with these settings:
23. On the Base Highlight layer apply Shape3D with same settings but change these:
24. Merge Base and Base Highlight layers together. 25a. Use Effects > Distort > Bulge and apply these settings:
25b. Repeat 25a. but change 1.00 to -1.00
25c. Use Quadrilateral Reshape and do this:
25d. Select the cone and Scale it until the ellipse of the base is similar to the ellipse of the body If theres not enough room for the cone you can move the head, wine and the body a bit upwards.
25e. Then Move the layers until they're in this order:
25f. Your finished! Flatten it (Ctrl+Shift+F) and you can add your name in it...
Post your creations below!