carbonize Posted November 3, 2008 Share Posted November 3, 2008 Tom Jackson has made a plugin for doing the fiery text from this tutorial. Quote C A R B O N I Z E Link to comment Share on other sites More sharing options...
loky Posted November 3, 2008 Share Posted November 3, 2008 it's good? Quote my first logo(made by me) Link to comment Share on other sites More sharing options...
AMG BatGirl Posted November 11, 2008 Share Posted November 11, 2008 i did it different this is what i got and im happy with it i just started using this paint.net today!! Quote Link to comment Share on other sites More sharing options...
Flyarrrrowz Posted November 11, 2008 Share Posted November 11, 2008 Other steps are quite clear but i'm just confused about when to put the "Fire!" effect. Can anyone kindly tell me? Quote Link to comment Share on other sites More sharing options...
Callum Posted November 15, 2008 Share Posted November 15, 2008 Great tutorial! With a few changes and etc. and being rather new to this programme, here is what I've achieved as a logo for my GCSE project. It's not great, but it's alright I think. If anyone has any improvement ideas, or knows an ideal size to save this as for the logo (going into word files, powerpoint multimedia adverts, spreadsheets, receipts, databases etc.) Quote Link to comment Share on other sites More sharing options...
Braz_Nuklz Posted November 16, 2008 Share Posted November 16, 2008 As a newbie, I liked this tutorial; I thank you greatly for it. (: Here's my go at it: (1) (2) Thanks again. Quote Even the weakest link can cause the strongest changes. Link to comment Share on other sites More sharing options...
Braz_Nuklz Posted November 16, 2008 Share Posted November 16, 2008 After doing another piece, and tweaking it a bit, I was able to come up with this. (1) (2) Quote Even the weakest link can cause the strongest changes. Link to comment Share on other sites More sharing options...
Hazard_Tsunami Posted December 6, 2008 Share Posted December 6, 2008 ... wish i knew how to get it like barkbark00's work Hint: Use dents Based on this hint, I have come up with these: I'm still playing around with all of the different effects I have available. I haven't been able to get the inside of the text to look more... hollow. Tom Jackson has made a plugin for doing the fiery text from this tutorial. Thank you! Hopefully this plugin will enable me to get the desired result (i.e. the hollow-like effect in the first image in this thread). Quote Link to comment Share on other sites More sharing options...
Kairyuka Posted December 7, 2008 Share Posted December 7, 2008 I'm such a noob look what i came up with <.< Quote ^Warning, excessive overuse of smileys above!^ Link to comment Share on other sites More sharing options...
Hazard_Tsunami Posted December 8, 2008 Share Posted December 8, 2008 I actually like how that turned out, actually. Maybe you used negation on the cloud effects instead of the layer? Either way, it turned out pretty cool. Try the plugin: viewtopic.php?f=16&t=25180 The plugin makes life much easier. This is what I was able to do with the plugin: Before, I couldn't get a hollow effect with the text. The plugin made life much easier. Quote Link to comment Share on other sites More sharing options...
Kairyuka Posted December 8, 2008 Share Posted December 8, 2008 Yeah, but i want a fiery effect. nice plugin EDIT: Thanks to that plugin i just finished my project, it's my first try on this kind of picture making Quote ^Warning, excessive overuse of smileys above!^ Link to comment Share on other sites More sharing options...
ssbmbeliever Posted December 13, 2008 Share Posted December 13, 2008 not at all what I wanted but... I say that so far brad's is the best, the flames actually go around the letters, I wanna see how brad did it lol. Quote Link to comment Share on other sites More sharing options...
T1Cybernetic Posted January 8, 2009 Share Posted January 8, 2009 I really love the fiery text so i had a quick go at my name T1Cybernetic (only took 15 minutes) i am only a learner still to paint.NET but i am pretty surprised and happy with what i got :wink: Although i could do probably do better next time... "EDIT" I was not 100% happy with my first attempt but earlier on i had an excuse to play a prank on a friend so i took the time to try the tutorial once again but this time i am wide awake and read it word for word and here is what i got 100% happy with this one... Quote Empty your mind. Be formless, shapeless, like water. Now you put water into a cup, it becomes the cup. You put water into a bottle, it becomes the bottle. You put it into a teapot, it becomes the teapot. Now, water can flow, or it can crash! Be water, my friend. (Bruce Lee) Link to comment Share on other sites More sharing options...
defi231 Posted January 9, 2009 Share Posted January 9, 2009 here is my first try for this tut, its really great. But i wonder how can i sharpen the zoom blur effekt, like johnblazes pictur on page 3 ..its awesome....some advice plz Quote Link to comment Share on other sites More sharing options...
hollyma Posted January 24, 2009 Share Posted January 24, 2009 Hello - I am a newbie and having some problems. When I follow the tutorial I lose my text as soon as I add the cloud layer. I thought I would break it down to what I am doing and hopefully someone can help. 1. Create the text layer, white on black - change the background to black and text to white on the background layer? 1. Use a large, blocky font - I am using Arial Black in Bold and Italic 2. Blur this layer with a gaussian blur - effects, blur, gaussian, I am using 1 2. Create the difference clouds layer - I am creating a new layer right here (my 2nd layer) 1. Set the blending mode for the clouds layer to 'Negation' - effects - render - clouds scale is at 250 roughness is at .50 I just change blend mode to negation 2. Render clouds with the scale for the clouds at roughly twice the font size - I am lost here 3. Repeat it a bunch to get a whispy look - Is this Ctrl F? 3. Use Levels to adjust the clouds layer. Open the levels adjustment, hit Reset, then under the output area, the replace the default values of 255, 1.00, 0 with 128, 2.0, 0. These are the output White point, output gamma, and output black point, respectively. - adjustment - levels (I think I have this one okay) 4. Use Levels to adjust the text layer. Open the levels adjustment, hit Reset, then change the input white point (the top-left textbox) to 210. - I select the text layer instead of the cloud layer here? 5. Flatten the image - hey I know how to do this,, hot dog 6. Use Levels to adjust the flattened image. Open the levels adjustment, hit Reset, then change the input range (the textboxes on the left) to 255, 96 (it defaults to 255, 0). - Would not allow me to get into the 0 to change to 96? 7. Open up the Curves adjustment. Choose 'RGB' under 'Transfer map', then uncheck the 'Red' and 'Green' checkboxes so you're only modifying the blue channel, add a control point as shown below. Do the same for the green channel so you have the curves shown below - I know how to do this also, I am on fire - LOL Ok, what the heck am I doing wrong? Thanks! Quote Link to comment Share on other sites More sharing options...
ban_midou Posted January 26, 2009 Share Posted January 26, 2009 http://i303.photobucket.com/albums/nn13 ... 5c407c.png maybe i am going wrong somewhere..... its either this or the flame thing is comin with the entire background also fiery... Also i tried with 3 layers : background text clouds also with 2 layers....maybe the 3 layer thing works... but what should the background be... this is exactly what i did according to the 1st post Steps: 1. create a new image 2.resize 3. create a text layer, paint bucket with black, text with white 4. gaussian blur 1/8 size of font 5. create clouds layer, layer properties --> blending mode =negation 6. Gradient tool, color = black, create a gradient on clouds layer 7. now the clouds effect, scale = 193 (font size = 104) mode = difference 8. repeat as desired (1 or 2 twice i did) 9. levels on output 128, 2.0 , 0 on clouds layer 10. levels input 210 on text layer (dont worry i resetted as it said) 11. flatten 12. level again accordingly to 1st post 13. curves adjustment where am i going wrong...??? why doesnt it have the fiery effect? As to answer hollyam's post... 1.i suppose the background is not as same as text layer.... 2. gaussian blur is 1/8 size of font..meaning if ur font size = 48, gaussian blur scale = 6 3. render ->> clouds --> mode = difference Negation is layer properties 4. rest steps are okay...try correcting these....i did but cudnt exactly get the effect...Maybe a Uber-super experft can help find the minor detail in this :wink: :wink: Thanks to anyone who answers.....i m new to paint.net, my first post and its been around 2 weeks... made other things as well since the forum is well maintained...will show it in respective posts.. Quote Did you Have a Nice DREAM???!!! Link to comment Share on other sites More sharing options...
xstarburstx Posted February 11, 2009 Share Posted February 11, 2009 I when i do the cloud effect ALL IT DOES is change the backround from white to black, when i do effect again it will turn opposite color.Example: I do cloud, backround is white. I do cloud again (ctrl f) and it turns black again.. Yeah I had that problem, too. What your doing wrong is that you have your primary color on white. You need to change the color back to black after you make the text Quote my DA Link to comment Share on other sites More sharing options...
xstarburstx Posted February 11, 2009 Share Posted February 11, 2009 Hello - I am a newbie and having some problems. When I follow the tutorial I lose my text as soon as I add the cloud layer. I thought I would break it down to what I am doing and hopefully someone can help.1. Create the text layer, white on black - change the background to black and text to white on the background layer? 1. Use a large, blocky font - I am using Arial Black in Bold and Italic 2. Blur this layer with a gaussian blur - effects, blur, gaussian, I am using 1 2. Create the difference clouds layer - I am creating a new layer right here (my 2nd layer) 1. Set the blending mode for the clouds layer to 'Negation' - effects - render - clouds scale is at 250 roughness is at .50 I just change blend mode to negation 2. Render clouds with the scale for the clouds at roughly twice the font size - I am lost here 3. Repeat it a bunch to get a whispy look - Is this Ctrl F? 3. Use Levels to adjust the clouds layer. Open the levels adjustment, hit Reset, then under the output area, the replace the default values of 255, 1.00, 0 with 128, 2.0, 0. These are the output White point, output gamma, and output black point, respectively. - adjustment - levels (I think I have this one okay) 4. Use Levels to adjust the text layer. Open the levels adjustment, hit Reset, then change the input white point (the top-left textbox) to 210. - I select the text layer instead of the cloud layer here? 5. Flatten the image - hey I know how to do this,, hot dog 6. Use Levels to adjust the flattened image. Open the levels adjustment, hit Reset, then change the input range (the textboxes on the left) to 255, 96 (it defaults to 255, 0). - Would not allow me to get into the 0 to change to 96? 7. Open up the Curves adjustment. Choose 'RGB' under 'Transfer map', then uncheck the 'Red' and 'Green' checkboxes so you're only modifying the blue channel, add a control point as shown below. Do the same for the green channel so you have the curves shown below - I know how to do this also, I am on fire - LOL Ok, what the heck am I doing wrong? Thanks! In order from the start to finish 1.your primary color is on white, or somewhere near that color. you need to put the prime color on black 1.take off the italics 2.you probably want to make the text a little more blurred 2.you need three layers. the background is black (bottom layer) then the cloud layer on top of that and then the text layer on top of that 1.try adjusting the roughness 2.there is a text in the box that says "scale" you want to adjust its number to around twice the number of the text you did 3.when using paint.net you can go back to effects and there will be something along the lines of "repeat cloud" try using that 4.yes, after you adjust the levels on cloud layer you do change to the text layer. 6.you might want to hit "reset". maybe that will fix that. Quote my DA Link to comment Share on other sites More sharing options...
xstarburstx Posted February 11, 2009 Share Posted February 11, 2009 Great text tutorials here is mine; mine looks more ghostly Quote my DA Link to comment Share on other sites More sharing options...
beast4e Posted March 5, 2009 Share Posted March 5, 2009 anybody out there who can help me with the firey text? can't understand the tutorial because i hardly speak english. need the text "Queens of Movie". please help me!! beast4e Quote Link to comment Share on other sites More sharing options...
TheGreatDudeThirteen Posted March 22, 2009 Share Posted March 22, 2009 This gave me just what I needed to make the final touches on my youtube banner. Thanks! Quote Link to comment Share on other sites More sharing options...
kodhuntingdon2 Posted May 11, 2009 Share Posted May 11, 2009 i managed 2 get this :twisted: Quote Link to comment Share on other sites More sharing options...
Cycle22 Posted May 23, 2009 Share Posted May 23, 2009 Not bad for my first attempt at PDN but it doesn't look like fire Quote Link to comment Share on other sites More sharing options...
MANIA Posted May 24, 2009 Share Posted May 24, 2009 Can someone Please do this with screen shots this is absolutely awful for begginers with out it looks like bits are missing i mean for instance mine comes out completely different every time!!! Quote Link to comment Share on other sites More sharing options...
IMPI SPIRIT Posted August 6, 2009 Share Posted August 6, 2009 Awesome ! Thanks for the tips. Only bad thing is, as I am a new user it is hard for me, and many others, to keep up and understand what your trying to tell us. so could you please make it easyer to understand and follow what your saying. Thanks Quote - Paintball is the special Olympics of Airsoft - Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.