Jump to content

Simple *Round* Glass Buttons


Recommended Posts

This tutorial is available as a PDF. Click here to view or download it

 

To complete this tutorial you will need to download and install the Drop Shadow plugin.

 

Start with an 800 x 600 (default) canvas.

 

Use the Ellipse Select tool and (holding the SHIFT key) drag a circle that has a Bounding Rectangle size of 400 x 400 pixels.

1

 

IMAGE > Crop to Selection

 

Set your Secondary Colour to completely transparent.

2

 

IMAGE > Canvas Size: Select By Percentage with a setting of 125% (ensure the Anchor is set to 'Middle')

 

You should now have a circle that is perfectly centred on your canvas.

3

 

Set your Primary Colour to Dark Green - I used Hex: 00660A - and your Secondary Colour to White.

 

Use the Magic Wand tool to select your white circle and use the Gradient tool, set on Radial, and use the right-mouse button to draw a gradient starting about 1/3 from the bottom of the circle up to the top.

4

 

Duplicate the Background layer twice. Call the top layer 'Top' and the middle layer 'Middle'.

 

Start with the 'Top' layer and choose the Move Selection tool (your circle should still be selected) and grab the top of your circle selection and begin dragging down until the height of the ellipse is 350px.

5

 

Press Delete.

 

Go to the 'Middle' Layer and us the Magic Wand to select the area outside the circle and CTRL+I to invert selection.

 

Choose the Move Selection tool again and grab the top of the circle and drag down until the height of the ellipse is 250px. Delete.

 

Go back to the 'Top' layer and EFFECTS > NOISE > Median: Radius 10, Percentile 0.

 

Use the Magic Wand to select the outside area and CTRL+I to invert.

 

Set your Primary Colour to White and Secondary Colour to Dark Grey.

 

Fill the crescent White. Press CTRL+D to deselect then EFFECTS > BLURS > Radial Blur: Amount 2.

 

Go to the 'Middle' layer and EFFECTS > NOISE > Median: Radius 10, Percentile 0.

 

Use the Magic Wand to select the outside area and CTRL+I to invert.

 

Choose the Gradient Tool and set it to Linear and draw a gradient (left-click) from the top of the crescent to the bottom.

 

CRTL+D to deselect then EFFECTS > BLURS > Radial Blur: Amount 2.

 

At this point select the the Background Layer and EFFECTS > BLURS > Radial Blur: Amount 2.

6

 

On the 'Top' layer set the blending mode to Screen and adjust the Opacity to 100 (F4 to access Layer Properties).

7

 

Repeat this on the 'Middle' layer.

 

Create a new layer and call it 'Control'. Move the 'Control' layer down to above the background and below the 'Middle' layers.

 

This is where you are going to put the text or image that relates to your button.

 

I am going to make this a 'Refresh' button and will be using the "Webdings" font - letter 'q'.

 

Select the Text tool and change the font to 'Webdings'. Increase the font size to 200 (you can do this by typing directly into the font size control).

 

Click onto your image and type the letter 'q'. This should give you a 'Refresh' symbol. Use the control arrow to position the symbol in the centre of your button.

8

 

EFFECTS > Drop Shadow: Offset-X 0, Offset-y 10, Blur Radius 10.

 

Flatten the image and EFFECTS > Drop Shadow: same settings again.

9

This tutorial is also available in my Googlepages

 

PKRM.png

PKRG.pngPKRT.pngPKRD.pngPKRP.png

Link to post
Share on other sites
Nice tut...

You should precise if the radial blur on top and mid layer are done within the selection or if we have to unselect.

And at some point in the tut you should do a radial blur as well on the background layer.

Thanks.

Thanks for the feedback. I have updated the original post with the instructions to deselect on the 'Top' and 'Middle' layers before each Radial Blur.

PKRM.png

PKRG.pngPKRT.pngPKRD.pngPKRP.png

Link to post
Share on other sites

When you said to IMAGE > Canvas Size: Select By Percentage with a setting of 125%

You should now have a circle that is perfectly centred on your canvas. Mine dose not turn out that way, it turns out like so:

annoyance.png

I set the % as so:

125.png

Don't know what I'm doing wroung :(

Also, my try turned out like this, which is another problem.

GlassButton.png

Any help?

"Only two things are infinite, the universe and human stupidity, and I'm not sure about the former"

[ dA Paint.NET Chat :: Yata on dA ]

Link to post
Share on other sites
When you said to IMAGE > Canvas Size: Select By Percentage with a setting of 125%

You should now have a circle that is perfectly centred on your canvas. Mine dose not turn out that way, it turns out like so:]

I set the % as so:

Don't know what I'm doing wroung :(

Any help?

On your Canvas Size dialog there is a setting at the bottom called 'Anchor'.

Yours is set to 'Top Left', hence your image is anchored to the top left corner.

Change the anchor position to 'Middle' and your circle will be centred on the canvas.

PKRM.png

PKRG.pngPKRT.pngPKRD.pngPKRP.png

Link to post
Share on other sites

Ok, I tried your tutorial, and I had a few problems.

When you said to make the circle exactly 400 Pixels, for my screen, it was the size of my fingernail or less.

So I made it as big as your picture on the tutorial. Another thing, for the TEXT, I could not find "Drop Shadow" under the "Effects" Tab. Any help?

On my first try, this is what I came out with.

Button.png

L!ve in your world, Get OWNED !n mine.

Signature4.png

Link to post
Share on other sites
Ok, I tried your tutorial, and I had a few problems.

When you said to make the circle exactly 400 Pixels, for my screen, it was the size of my fingernail or less.

Caliph,

Have you tried adjusting the zoom level?

If you set this to 'Window' whatever your canvas size it'll comfortably fit into your screen at a size you can work with.

ZoomWindow.png

PKRM.png

PKRG.pngPKRT.pngPKRD.pngPKRP.png

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...