Ilikecarsandgames Posted September 24, 2020 Share Posted September 24, 2020 so I have this image of this bus taken from international's website and I want to separate wheels from it (not including shadow). how do I do that using paint.net? Quote Link to comment Share on other sites More sharing options...
MJW Posted September 24, 2020 Share Posted September 24, 2020 If by "separate wheels from it" you mean you want to get the wheels without the bus, I suggest: Duplicate the image into two layers (one for each of the wheels). Zoom in so you can clearly see the wheels. In each layer, select a wheel using the Ellipse Select tool. Adjust the selection with the Move Selection tool, if necessary (as it likely will be). Invert the selection. Erase the selection. Quote Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 24, 2020 Author Share Posted September 24, 2020 6 minutes ago, MJW said: Duplicate the image into two layers (one for each of the wheels). Zoom in so you can clearly see the wheels. In each layer, select a wheel using the Ellipse Select tool. Adjust the selection with the Move Selection tool, if necessary (as it likely will be). Invert the selection. Erase the selection. Thanks, but how do I delete the wheels on the original background? I just want it to be a black space for the wheels. Quote Link to comment Share on other sites More sharing options...
LoudSilence Posted September 24, 2020 Share Posted September 24, 2020 2 minutes ago, stupidiwillleave said: Thanks, but how do I delete the wheels on the original background? I just want it to be a black space for the wheels. Just do MJW's steps, but skip step 1 and 4 Quote Unofficial PDN Discord Server Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 24, 2020 Author Share Posted September 24, 2020 3 minutes ago, LoudSilence said: Just do MJW's steps, but skip step 1 and 4 It just left this ugly space of circle transparency. Quote Link to comment Share on other sites More sharing options...
toe_head2001 Posted September 24, 2020 Share Posted September 24, 2020 1 minute ago, stupidiwillleave said: It just left this ugly space of circle transparency. What do you want instead? Quote My Gallery | My Plugin Pack Layman's Guide to CodeLab Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 24, 2020 Author Share Posted September 24, 2020 3 minutes ago, toe_head2001 said: What do you want instead? Something like this: Notice how there's a blank space for each wheel. That's what I want. Quote Link to comment Share on other sites More sharing options...
MJW Posted September 24, 2020 Share Posted September 24, 2020 There's no magic way to fill in the area where the wheels were. You'll have to fill it in yourself, based on the surrounding colors. You can use the Clone tool (which I've never had much luck with), or you can use the Dropper to sample the colors, and the use things like rectangular fills, the paint brush, Shapes, and the Line/Curve tool to add the colors. You might want to erase everything inside the wheel well, the add something close to what was there in a lower layer. The shapes involved in the image are quite simple, so it shouldn't be that difficult. Using a separate lower layer makes it so you don't have to "color inside the lines" of the top edges, and also allows you to afterword adjust things the the hue and the brightness to get a better result. For the blue-car picture, it would have been really easy. Erase everything within the wheel well, then in a a lower layer, either use rectangular selections and fills, or rectangular Shapes, to add the dark blue regions. Quote Link to comment Share on other sites More sharing options...
MJW Posted September 24, 2020 Share Posted September 24, 2020 7 hours ago, MJW said: There's no magic way to fill in the area where the wheels were. You'll have to fill it in yourself, based on the surrounding colors. You can the CloneStamp tool (which I've never had much luck with), or you can use the Dropper to sample the colors, and the use things like rectangular fills, the paint brush, Shapes, and the Line/Curve tool to add the colors. You might want to erase everything inside the wheel well, then add something close to what was there, in a lower layer. The shapes involved in the image are quite simple, so it shouldn't be that difficult. Using a separate lower layer makes it so you don't have to "color inside the lines" of the top edges, and also allows you to afterward adjust things like the hue and the brightness to get a better result. For the blue-car picture, it would have been really easy. Erase everything within the wheel well using a Ellipse selection, then in a a lower layer, either use rectangular selections and fills, or rectangular Shapes, to add the dark blue regions. Quote Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 24, 2020 Author Share Posted September 24, 2020 Did it by using the line tool. It is a bit sloppy but you won't be able to see the bus behind the wheels anyways. Quote Link to comment Share on other sites More sharing options...
MJW Posted September 24, 2020 Share Posted September 24, 2020 If you erase everything within the wheel well, and then work in a lower layer, you should be able to easily achieve a perfectly elegant result. The only thing that needs to be precise is the bottom edge, and it's basically a straight line. Quote Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 24, 2020 Author Share Posted September 24, 2020 Here is the finished bus body. Quote Link to comment Share on other sites More sharing options...
MJW Posted September 24, 2020 Share Posted September 24, 2020 Why are the wheel-well edges so ragged? If you use an Ellipse select, followed by an Erase Selection, I'd expect them to be nice and smooth. Quote Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 24, 2020 Author Share Posted September 24, 2020 Just now, MJW said: Why are the wheel-well edges so ragged? If you use an Ellipse select, followed by an Erase Selection, I'd expect them to be nice and smooth. The thing is that the line tool only supports 4 points. If I was able to adjust that number it would be smooth. Quote Link to comment Share on other sites More sharing options...
MJW Posted September 24, 2020 Share Posted September 24, 2020 Two things: If you move the two middle nodes around, a single curve can accurately coincide with the wheel wells, and it will be very smooth. When you need multiple curves, and you want a good result, you must take care to match up the endpoints, and adjust the two inner nodes so that the slope of the curves match where they meet. It requires a bit of care, but it can be done. I, and lots of others here, have done it many time. (One thing I wish PDN had, and which I've requested, is the ability to string together curves, so the endpoints automatically match. That would make drawing complex curves much easier.) An Ellipse select can accurately match the wheel-well openings, and will result in a very smooth edge. 1 Quote Link to comment Share on other sites More sharing options...
Ilikecarsandgames Posted September 25, 2020 Author Share Posted September 25, 2020 4 hours ago, welshblue said: I know an area of Wales that the wheel problem would be sorted in 2 minutes ... although bricks may spoil the finished look ... FWIW I think the chassis part you replace when the wheels have gone, would look better if you use the color picker to determine the colour as is, instead of black black. Too abrupt ? Wow! How did you do that? Quote Link to comment Share on other sites More sharing options...
AndrewDavid Posted September 25, 2020 Share Posted September 25, 2020 (edited) @welshblue and I think alike. We both need things to occupy our time while isolated. Here's my rendition. Edited September 25, 2020 by AndrewDavid Replaced image with new background 1 Quote Link to comment Share on other sites More sharing options...
AndrewDavid Posted September 25, 2020 Share Posted September 25, 2020 Seems we have to rethink our backgrounds considering the Dark Theme. Transparency turns to black Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.