Rick Brewster Posted November 23, 2005 Share Posted November 23, 2005 Was this the one that Bob helped with? Quote The Paint.NET Blog: https://blog.getpaint.net/ Donations are always appreciated! https://www.getpaint.net/donate.html Link to comment Share on other sites More sharing options...
Rick Brewster Posted November 23, 2005 Author Share Posted November 23, 2005 Looks like some of the tool help texts are being cut off. For example, MoveTool.HelpText shows up as, "Deplacer les pixels selectionnes: Faire glisser la selection pour la deplacer. Faire glisser les poignees pour ajuster Faire g" ^ it gets cut off at the last 'g' (even at high resolution -- it seems to just cut if off after a certain number of characters). You'll need to make these shorter so that they fit. We had trouble getting them to fit for English and German, too, but it should be possible. Quote The Paint.NET Blog: https://blog.getpaint.net/ Donations are always appreciated! https://www.getpaint.net/donate.html Link to comment Share on other sites More sharing options...
Bob Posted November 23, 2005 Share Posted November 23, 2005 I played a little more and found that the dotnetwidgets link in the About.Credits is broken in all versions. Quote No. Way. I've just seen Bob. And... *poof!*—just like that—he disappears into the mist again. ~Helio Link to comment Share on other sites More sharing options...
Rick Brewster Posted November 23, 2005 Author Share Posted November 23, 2005 I believe Tim Dawson has abandoned that project. I'll fix the link to point to his main website, http://www.divil.co.uk/net/controls/, for our 2.6 release. (assuming we're still using DotNetWidgets by then) Quote The Paint.NET Blog: https://blog.getpaint.net/ Donations are always appreciated! https://www.getpaint.net/donate.html Link to comment Share on other sites More sharing options...
Reno Posted November 24, 2005 Share Posted November 24, 2005 I made some corrections, but... the label in the status bar is really too short ! And some descriptions cannot be reduced (french is a language that loves long sentences) (I have the same problem with the fill style label). Quote Link to comment Share on other sites More sharing options...
Rick Brewster Posted November 24, 2005 Author Share Posted November 24, 2005 Reno, for the Fill Style, insert the following in to your strings file: true 233,27 98,3 That will increase the width of the "Fill style:" label by 20 pixels, and then push the combo box to the right by 20 pixels. The original values are 213,27 and 78,3. If you need more than 20 pixels, adjust accordingly. As for the status bar ... keep trying Perfect grammar is not required here. Quote The Paint.NET Blog: https://blog.getpaint.net/ Donations are always appreciated! https://www.getpaint.net/donate.html Link to comment Share on other sites More sharing options...
Reno Posted November 25, 2005 Share Posted November 25, 2005 Well, that's it ! It seems that all the tool help texts fit correctly. Quote Link to comment Share on other sites More sharing options...
Rick Brewster Posted November 26, 2005 Author Share Posted November 26, 2005 I have posted it to the language pack downloads topic, http://paintdotnet.12.forumer.com/viewtopic.php?t=538 Thanks! Quote The Paint.NET Blog: https://blog.getpaint.net/ Donations are always appreciated! https://www.getpaint.net/donate.html Link to comment Share on other sites More sharing options...
Philou Posted December 2, 2005 Share Posted December 2, 2005 Well, that's it !It seems that all the tool help texts fit correctly. Bonjour Je suis sur le point de traduire les fichiers d'aide de Paint.NET. Je vous propose une collaboration à ce sujet pour créer un pack français complet. à bientôt je l'espère Hello I am about to translate Paint.NET's help file into french language I would like to be in collaboration with you to build a full french package. Hope to read you Quote Philou http://manuelsdaide.com Link to comment Share on other sites More sharing options...
acotte Posted December 9, 2005 Share Posted December 9, 2005 Je crois que Philou se propose de traduire l'aide de Paint.Net. Je fais une petite enquête présentement sur l'intérêt dans les écoles du Québec pour Paint.Net. Si la réponse est positive, la société à but non-lucratif pour laquelle je travaille serait prête à travailler également à cette traduction. Si cette offre vous intéresse, contactez-moi. André Cotte Conseiller en logiciels libres pour les écoles Direction des services pédagogiques Société GRICS Quote André Cotte Link to comment Share on other sites More sharing options...
Philou Posted December 15, 2005 Share Posted December 15, 2005 Bonjour Je ne comprend pas bien votre réponse. Je traduis simplement ce fichier d'aide dans le but de le mettre à disposition pour tout les visiteurs de mon site si ce document les intéresse. Je souhaite simplement collaborer avec le traducteur de l'interface du programme pour créer un package français complet (interface + aide). Le fichier sera bientôt pret et téléchargeable sur mon site. Quote Philou http://manuelsdaide.com Link to comment Share on other sites More sharing options...
Philou Posted January 9, 2006 Share Posted January 9, 2006 Hello A full french pack (interface & help files) has been created by Reno and myself. It is available for everybody on my Web site. Regards Bonjour Un package complet (interface et fichiers d'aide) a été créé par Reno et moi-même. Il est disponible au téléchargement sur mon site Web. Cordialement Quote Philou http://manuelsdaide.com Link to comment Share on other sites More sharing options...
singeroi Posted May 5, 2009 Share Posted May 5, 2009 Bonjour! Thank you for the hardwork on the localization. Quote Link to comment Share on other sites More sharing options...
Aethec Posted June 3, 2009 Share Posted June 3, 2009 ...it should be "Configuration de l'enregistrement" and not "Enregistrer la configuration" --- Quand on enregistre un fichier, ça devrait être "Configuration de l'enregistrement" et pas "Enregistrement de la configuration". On configure comment on va enregistrer, on n'enregistre pas une configuration Quote Link to comment Share on other sites More sharing options...
Aethec Posted June 3, 2009 Share Posted June 3, 2009 ...it should be "Configuration de l'enregistrement" and not "Enregistrer la configuration" --- Quand on enregistre un fichier, ça devrait être "Configuration de l'enregistrement" et pas "Enregistrement de la configuration". On configure comment on va enregistrer, on n'enregistre pas une configuration Quote Link to comment Share on other sites More sharing options...
Olivier Posted October 16, 2009 Share Posted October 16, 2009 Hi Aethec, Indeed ! Now fixed for next version (3.5) Thanks! Keep sending feedback. Quote Olivier Guinart olivierg@online.microsoft.com - Please do not send email directly to this alias. This alias is for newsgroup purposes only - This posting is provided "AS IS" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.