Jump to content

A way to design a gear


MadJik

Recommended Posts

This tutorial is available as a PDF. Click here to view or download it

A way to design a gear

 

Note : Since this tuto was published, there is a plugin for that, which could reduce number of steps.

 

Anyhow this tutorial is a good training and shows you some tips with paint.net...

 

Introduction:

You could find in the tuto below how to finish some gears/cog and how to give them

some chrome aspect.

Make some gears/cogs (welshblue) http://forums.getpaint.net/index.php?showtopic=15104

Easy chrome (Ash) http://forums.getpaint.net/index.php?showtopic=12440

Gold metal (Sarkut) http://forums.getpaint.net/index.php?showtopic=20201

 

My examples:

What I'm going to show you is a way to create some shapes of gears only.

gear99.jpg

 

If you want something like this you'll have to go on with the other tutorials above...

gear00.jpg

 

Needed plugins:

AA's Assistant (in dpy's pack)

Kaleidoscope

 

My tutorial:

Follow the instructions in the images and in the text.

:Warning: For this tutorial I've set the brushwidth to 4, but you could let it to 2...

01.

gear01.jpg

As often, bigger images will give better quality after resizing to needed size...

 

02.

gear02.jpg

 

03.

gear03.jpg

(you could also draw a circle anywhere on the area and use the align effect to move

it to the center.)

 

04.

gear04.jpg

 

05.

gear05.jpg

Instead ellipse you could use a triangle.

 

06.

gear06.jpg

 

07.

Menu Effects/Distort, kaleidoscope,

change the quantity and set the reflective mode to normal.

gear07.jpg

 

08. The result:

gear08.jpg

 

09.

gear09.jpg

(this could have been done earlier, between step 3 and 4!)

 

10.

gear10.jpg

 

11.

gear11.jpg

 

12.

Menu Effects/Noise, Median, change the radius to (about) 33.

gear12.jpg

 

13.

Menu Effects/Object, AA's Assistant.

gear13.jpg

 

14.

gear14.jpg

 

-------------------

:FileSave: :Warning: As you've done a lot of work til here, it's a good idea to save your work now (if it isn't done yet).

-------------------

 

15.

gear15.jpg

(you could also draw each circles anywhere on the area and use the align effect

to move it to the center. in this case use a layer per circle and merge them after

the aligns are done)

 

16.

gear16.jpg

(now you can't use the align effect!)

 

17.

gear17.jpg

 

18.

Menu Effects/Distort, kaleidoscope,

change the quantity and set the reflective mode to normal.

gear18.jpg

 

19. The result:

gear19.jpg

 

20.

gear20.jpg

 

21.

gear21.jpg

 

22.

gear22.jpg

 

23.

Menu Effects/Noise, Median, use the previous settings (or test with other values!).

gear23.jpg

 

24.

Menu Effects/Object, AA's Assistant.

gear24.jpg

 

25. The result:

gear25.jpg

 

 

End of tutorial

Enjoy and let me see your gears...

 

More examples:

gear98.jpg

 

gear97.jpg

 

 

Link to comment
Share on other sites

Wonderful tutorial! diagona.032.pngdiagona.032.pngdiagona.032.png

The only teeny tiny point I would make is that the number of spokes should divide the number of teeth by a whole number. You have 18 teeth and 5 spokes 18/5 = 3.6 boltbait.sad.png Better to have 6 spokes (18/6=3.0 boltbait.smile.png ) as this would make the cog more symmetrical.

Link to comment
Share on other sites

  • 1 month later...

Cool tutorial,I also never thought of using Median that way,nice tip. I must tell you something though,lol,it's really a sprocket and not a gear but I get the idea and with a few changes in settings I think it will work nicely. ;)

Here is my first attempt at it,sorry I went a bit further. ;)

th_72-c.jpg

 

                                                              http://forums.getpaint.net/index.php?/topic/21233-skullbonz-art-gallery

Link to comment
Share on other sites

  • 4 weeks later...

I learned a whole lot from this tutorial, especially about precise positioning of the cursor to make elipses and lines. I did get stuck towards the end. After applying the median plugin, the center hole closed up. Also, I've never used the Magic Wand with the Alt Key before. I couldn't get it to do anything. I got rid of the hole by clicking the Magic Wand in the empty hole in the white gear layer (contiguous mode) and then going to the black gear layer and deleting it. I would like to know what the Alt + Magic Wand was supposed to do if anybody knows.

th_gearcapture.png

th_gear.png

I'll do the other tuts to make this gear shine later. My brain needs a rest. ;) Thanks for the tut.

Thanks for responding. I went back and did your tut again. I didn't realize that when you subtract with the Magic Wand +Alt, you actually tap the Magic Wand on the part you want to subtract. I know. It seems obvious, but I had never used the Magic Wand in this way before. I made four different gears using your tut, but I only "finished" one version. I think in this one I used a triangle instead of the ellipse to form the outside of the gear. This version of the gear seems a little warped, but that's from the other tut.

th_3gear4.png

wand o

Edited by Bob11
Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 months later...
That... made my brain hurt. bubblerevolution.aagh.png

boltbait.lol.png

It's about symmetry and balancing the sprocket/cog when it spins. PeterPawn's image above is a really nice image & will help me explain:

The spokes in the image at 1 o'clock, 10 o'clock and 5 o'clock 'point' to high points on the teeth. This means that taken individually, these areas have more weight than the spokes at 3 o'clock and 8 o'clock - which point to spaces between the teeth (these two spokes will be lighter).

When spun, the cog will be out of balance because there is a heavier point (approx 11 o'clock) which is not balanced by the opposite side of the cog.

Clear as mud? boltbait.big_smile.png

Link to comment
Share on other sites

Clear to me - for once. I'm also wondering about the wear & stress factors but this is more about art than engineering. A good point to keep in mind just the same.

I did this ages ago & then never posted it. Sorry Madjik!

th_MadjikCogs.png

I should have kept a copy of the cog so that I could blur the Trail part. Nevermind we all learn. The flowers were made by using the concrete tute & a vector template.

PP, what a lovely shiny cog!

THiGVp.png

Knowledge is no burden to carry.

 

April Jones, 2012

 
Link to comment
Share on other sites

  • 1 year later...

I wasn't able to use this tut in its entirety because I couldn't dload the Kaleidoscope script.  However, it taught me techniques I was able to adapt and inspired me to come up with this...

 

rustygeartwox_zpsd28ee30b.png

 

Thanks for a tut that didn't just show how to make an object but taught techniques that could be used in other ways as well.

Edited by dynojuggler
dynojugglersigsmall-1.jpg
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...