Jump to content

Bullet shot glass


KiLLEz7

Recommended Posts

Iv been trying this for a while and have still not been able to perfect it

this is the best iv managed to come up with so far

sig9ig6.png

but it still feels like is not as good as it could be

this is kinda what im aiming to achive

sig5ma4.png

any one got any ideas on how i could improve this?

thanx

33883894cp4.png
Link to comment
Share on other sites

IMHO the cracks are really nice, but too uniform.

I would adjust them so that they vary more in length or distance from the bullet hole, and perhaps, fewer of them so they don't surround the entire hole like a complete halo. So some of the cracks should be larger and extend further, and this means you probably need less of the smaller cracks. I would also vary the cracks so that the overall effect is not so circular = more irregular around the hole.

BTW it's a really nice effect - I like it enormously :!:

Link to comment
Share on other sites

IMHO the cracks are really nice, but too uniform.

I would adjust them so that they vary more in length or distance from the bullet hole, and perhaps, fewer of them so they don't surround the entire hole like a complete halo. So some of the cracks should be larger and extend further, and this means you probably need less of the smaller cracks. I would also vary the cracks so that the overall effect is not so circular = more irregular around the hole.

BTW it's a really nice effect - I like it enormously :!:

thanx a lot ill try it out and see if it looks a lot better

Search for my bullet hole tut, and see if the method can help you more.

i did have a look at it after i had done them and it works in a different kinda way but never the less ill have a look again and see if i can use it in any way

Edit: any better?

killezshotyp9.png

33883894cp4.png
Link to comment
Share on other sites

i think the way im doing it isnt right it looks more like bullet proof glass as there is a closer shatter and with the bullet holes it looks a bit odd i dont think they should be there.

i change it to this though:

61741xs2ha9.png

and then managed to get this out of it which i feel looks a lot better

zillez7shotvm1.png

i dont know if you users want me to or not but i can make a tut on this if there isnt one already

Welcome to the PDN forums :mrgreen: i can't wait to see your gallery! ;o

thank you :) ill have to make one sometime once i get round to finishing some stuff

33883894cp4.png
Link to comment
Share on other sites

i think that the second and the last one is best but i like the second more.

But it is you that should choose not me.

FireejiZer.png

Simplicity ftw!

Link to comment
Share on other sites

I like the top and bottom ones. I would be especially impressed if the effect was exactly in between the two results!

Mentioning glass types is a good point. Plate glass would shatter differently to safety glass, windscreens or ordinary glass.

I vote for a tutorial :!:

Link to comment
Share on other sites

  • 1 year later...

Topic is old, old, old. Please read the Forum Rules

<locked>

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...