Jump to content

Glossy Web 2.0 Style Text


CyberSpace

Recommended Posts

This tutorial is available as a PDF. Click here to view or download it

 

This tutorial will show you how to make glossy, "web 2.0 style" text.
Plugins needed:

Outline Object by @BoltBait or Outline Object by @pyrochild
Optional Plugins:
Color Balance by @BoltBait or Color Balance+ by @dpy
Drop Shadow by @KrisVDM
HOW TO INSTALL PLUGINS

 

1. First, open (:FileOpen:) or create (:FileNew:) a new image.
step-start.png

 

Create a New Layer (:LayersAddNewLayer:) and write some text in whatever color you want.
:LayersLayerProperties:  Name this layer "Text."

step1a.png

 

2. :LayersDuplicateLayer:  Duplicate this layer.
:LayersLayerProperties:  Call the new one "Gradient Text".

With the "Text" layer selected, go to Adjustments>Brightness/Contrast (:BrightnessContrast:) and darken the text some.
step2a.png

 

Alternatively, you can use ColorBalance to make the colors match better, and make the text look better in general. (I did; I added more blue)

Then, use a linear (:GradientTypeLinearClamped:) transparency gradient (use the Gradient (:GradientTool:) tool in Transparency (:GradientAlphaOnlyTrue:) mode) and drag from the bottom of your text up to the middle. Your image should look something like this:
step2b.png

 

3. Make a New Layer (:LayersAddNewLayer:).

 :LayersLayerProperties:  Call this one "Glow."
Select the "Text" layer, and using the Magic Wand (:MagicWandTool:) in Global (:FloodModeGlobal:) mode, click on your text to get it selected.  Set Primary color to white.
Switch back to the "Glow" layer, and using the Ellipse (Ellipse-Tool.png) tool in Draw Filled Shape (:ShapeDrawTypeInterior:) mode, draw a white highlight on the top of your text.
:LayersLayerProperties:  Double click on this layer to open layer properties, then change the opacity to 45, or whatever you prefer.  Deselect (CTRL+D) the selection area.
step3.png

 

4. Uncheck the "Background" layer to temporarily make it invisible, so you can see how thick the outline will be.
Select the "Text" layer and go to Effects>Outline Object.  Outline your text in white. I chose a width of 5 and transparency of 220.
step4a.png

 

5. Go to Effects>Object>Drop Shadow. Set Y offset and X offset to 0. Set shadow color to R=G=B=92. You can use whatever you want for the shadow size. I recommend a widening radius of 5, a blur radius of 5, and a shadow opacity of 150.
Drop-Shadow.png

 

Merge (:LayersMergeLayerDown:) all layers and your image should look something like this:
step-end.jpg

 

Another example:
paint-net-red.png

 

Please post any questions about this tutorial, results, and advice in this topic.

 

Edited by ReMake

 

  • Upvote 2

crackintime.png

Are you ready?

Glossy Web 2.0 Style Text

Link to comment
Share on other sites

I think it's been done a few times in the past, but since the legacy tutorials are going bye-bye soon, that's not an issue.

But I also think:

  • The glossy layer you add almost completely negates any effect you get from the transparent gradient
    You should tell them to use filled shape :ShapeBoth: for the ellipse, otherwise they'll get just an ellipse :ShapeOutline: instead
    I think you should explain to select the text layer and globally select outside their text, otherwise it won't select inside the letters if needed
    I think the Curves, adjustment to all white and then invert colors was unnecessary...could just turn it to all black and save the extra step

just a few ideas...

Link to comment
Share on other sites

I think it's been done a few times in the past, but since the legacy tutorials are going bye-bye soon, that's not an issue.

But I also think:

  • The glossy layer you add almost completely negates any effect you get from the transparent gradient
    You should tell them to use filled shape :ShapeBoth: for the ellipse, otherwise they'll get just an ellipse :ShapeOutline: instead
    I think you should explain to select the text layer and globally select outside their text, otherwise it won't select inside the letters if needed
    I think the Curves, adjustment to all white and then invert colors was unnecessary...could just turn it to all black and save the extra step

just a few ideas...

Yeah, the white ellipse covers up the top part of the gradient. It's pretty much my fault though, because I did not darken the bottom enough in the example. I forgot to add to use a filled ellipse, I'll change that. I wan't thinking...you could just drag to the bottom right and corner to get black...I'll change that.

crackintime.png

Are you ready?

Glossy Web 2.0 Style Text

Link to comment
Share on other sites

  • 2 weeks later...

well written tutorial, and i think this has been done before but the tutorial wasn't as well written. Good job. I don't do much word art but this will be good for the newbies because they like shiny things.

 

"Clearly it's a very serious and literal meaning. If you're not solving physics equations then get off my lawn!-Rick Brewster Paint.net Lead Developer"

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
Guys im a bit stuck here wif no.2 can anybody help me.wat does it mean by this
2. :DuplicateLayer: Duplicate this layer and make sure your have the top layer selected.
.need the help A.S.A.P

like it says...click duplicate layer button :DuplicateLayer: then make sure the top of the two layers is selected, so the layer is highlighted in blue in the layers window

Link to comment
Share on other sites

:DuplicateLayer: Now, duplicate the text layer.

:Curves: Go to Adjustments>Curves. Make sure you have selected the bottom duplicate layer. With R,G, and B checked, and in RGB mode, drag the point to the bottom right of the box. Your text should now be black (the text will get black around the edges).

:GaussianBlur: Now, go to Effects>Blurs>Gaussian Blur and blur by 10px (or whatever you prefer).

FYI, this step can be simplified significantly with my Drop Shadow effect.
Link to comment
Share on other sites

  • 2 weeks later...

3. :AddNewLayer: Make a new layer.

:MagicWandTool: Using the magic wand in global mode, click on your text to get it selected.

:EllipseTool: :ShapeInterior: Using the ellipse tool (use filled shape mode), draw a white highlight on the top of your text.

:Properties: Double click on your layer to open layer properties, then change the opacity to 45 (or whatever you prefer)

4. Temporarily make your background layer invisible (so you can see how thick the outline is).

Go to Effects>Outline Object. Outline your text in white. I chose a radius of 7 and strength of 5.

:DuplicateLayer: Now, duplicate the text layer.

:Curves: Go to Adjustments>Curves. Make sure you have selected the bottom duplicate layer. With R,G, and B checked, and in RGB mode, drag the point to the bottom right of the box. Your text should now be black (the text will get black around the edges).

:GaussianBlur: Now, go to Effects>Blurs>Gaussian Blur and blur by 10px (or whatever you prefer). Your image should look something like this:

Relative newbie to Paint.net, so hope someone can help me - apologies if I'm being really stupid too. I can manage fine with this tut up the first point above.

Following the tutorial to the letter, it says to create a new layer, and then use the magic wand in global mode to select the text. When I do this, it selects the whole layer rather than just the text. Should I reselect the text layer before doing this? (presumably by highlighting that layer in the layers box).

Presumably the next stage of drawing the ellipse should be on the new layer I created?

When I try step 4, even if selecting the text via reselecting layers above, I use the outline tool, but get no result - it just remains with the thin black outline of the magic wand selection.

Hope someone can help me...as its sending me round the bend not being able to do something which should no doubt be so simple. Hopefully I'm just selecting the wrong layers at the wrong time or something, so if someone could even highlight the layers I should be selecting for each task, that should hopefully help....

Know this forum isn't for questions, but thought better asking here, just in case anyone else is having the same issues....(no doubt will just be me!)

Thanks guys.... :D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...