CPJapan Posted August 6, 2010 Share Posted August 6, 2010 worked very nice Quote Screw you guys, I'm goin' home! Link to comment Share on other sites More sharing options...
Martel Posted August 6, 2010 Share Posted August 6, 2010 Nice thanks Quote Link to comment Share on other sites More sharing options...
uvah Posted August 13, 2010 Share Posted August 13, 2010 I like this tutorial. I've had a problem with creating the glow effect around buttons. Similar to the control buttons at the top right of the web page. I'd like to be able to use them in my calendars. Any suggestions? Or perhaps there is another tutorial you can refer me to. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Martel Posted August 13, 2010 Share Posted August 13, 2010 Are you talking about these? Quote Link to comment Share on other sites More sharing options...
uvah Posted August 19, 2010 Share Posted August 19, 2010 Exactly. The buttons I normally make are bland to say the least. The background glow effect I tried before was a dismal failure. Now that I'm learning with PDN it seems to me that such an effect should be fairly easy. Any suggestions as to how to go about it. BTW...I found the button maker in effects\render\buttons. I'm gonna go play with it now...he he. Quote Link to comment Share on other sites More sharing options...
Martel Posted August 19, 2010 Share Posted August 19, 2010 (edited) If it is only around the border the Bevel Selection will do it, change the bevel color to white and monkey around with the depth slider. EDIT: This is bevel selection all the way around the edge of a red square. Edited August 20, 2010 by Martel Quote Link to comment Share on other sites More sharing options...
uvah Posted August 22, 2010 Share Posted August 22, 2010 Thanks very much. You see...if I don't ask I'll never learn. This will go a long way to solving my problem. Quote Link to comment Share on other sites More sharing options...
Stone Frango Posted August 27, 2010 Share Posted August 27, 2010 My first result: My final result (after fiddling around): Quote Link to comment Share on other sites More sharing options...
psumner Posted June 22, 2011 Share Posted June 22, 2011 I like it, thanks for the tip. Mine: Quote [center][img]http://www.woolmerhill.surrey.sch.uk/sig.png[/img][/center] Link to comment Share on other sites More sharing options...
Flyer1 Posted September 22, 2011 Share Posted September 22, 2011 (edited) Hi everyone... i used the second button instruction, but i can't open the link to Tom's Lab.... my fault maybe? 4.) In the Colors window, set the primary color's transparency-alpha to 0 (zero). Open up Tom's Code Lab and load SearedIce's Transparent Fade script. You can get Tom's Code Lab here: http://paintdotnet.1...rumer.com/viewt ... ight=#5120 . Edited September 22, 2011 by Flyer1 Quote Link to comment Share on other sites More sharing options...
Ego Eram Reputo Posted September 22, 2011 Share Posted September 22, 2011 Ah, right. Very old link. It refers to Codelab which is a plugin for Paint.net that allows you to create other plugins (effects). In all honesty, codelab is a bit of overkill for this tutorial. Try using the regular gradient tool: 1. Set primary color to your bolder color. 2. Set the secondary color set to your weaker color. 3. Select the gradient tool and pull a linear gradient from the top of the canvas to the bottom. How does that work for you? Quote ebook: Mastering Paint.NET | resources: Plugin Index | Stereogram Tut | proud supporter of Codelab plugins: EER's Plugin Pack | Planetoid | StickMan | WhichSymbol+ | Dr Scott's Markup Renderer | CSV Filetype | dwarf horde plugins: Plugin Browser | ShapeMaker Link to comment Share on other sites More sharing options...
Flyer1 Posted October 5, 2011 Share Posted October 5, 2011 Sorry for my late reaction, i've been very busy last few days. Thx so much, i am going to try this today, i'll be back and of the day with 'my report' haha! grtz Quote Link to comment Share on other sites More sharing options...
Flyer1 Posted October 7, 2011 Share Posted October 7, 2011 Ah, right. Very old link. It refers to Codelab which is a plugin for Paint.net that allows you to create other plugins (effects). In all honesty, codelab is a bit of overkill for this tutorial. Try using the regular gradient tool: 1. Set primary color to your bolder color. 2. Set the secondary color set to your weaker color. 3. Select the gradient tool and pull a linear gradient from the top of the canvas to the bottom. How does that work for you? Sorry, but it doesn't work at all for me, though it makes an effect, it really isn't the one as shiny and luxurious as i was looking for. Much to simple appearance. Could you provide me perhaps with a working link to the codelab? I dit already pull one codelab.dll from the net, but it doesn't start a environment or control panel, just a textblock without any possibilities or settingschoice... It appears to me, that the original link was too long to show in the full link, and was cut off by the three dots ... after the dots, there was still a word left, in that full-url. but i cannont recreate or restore the full link unfortunately!! Grtz Flyer Quote Link to comment Share on other sites More sharing options...
Ego Eram Reputo Posted October 8, 2011 Share Posted October 8, 2011 There's a link in my signature...., Quote ebook: Mastering Paint.NET | resources: Plugin Index | Stereogram Tut | proud supporter of Codelab plugins: EER's Plugin Pack | Planetoid | StickMan | WhichSymbol+ | Dr Scott's Markup Renderer | CSV Filetype | dwarf horde plugins: Plugin Browser | ShapeMaker Link to comment Share on other sites More sharing options...
brenchu321 Posted June 18, 2012 Share Posted June 18, 2012 I like the tut, but I noticed that using a lower px radius (3) of Gaussian Blur was better than what you had in the first tut. This is because of the size of the button I wanted to make. Quote Link to comment Share on other sites More sharing options...
rizal23 Posted August 4, 2012 Share Posted August 4, 2012 (edited) A good tutorial. I like the second one but the color is less bright, how about if it replaced a brighter blue color. Thanks for the tutorial, it will be my inspiration in the work. Edited August 4, 2012 by rizal23 Quote Link to comment Share on other sites More sharing options...
alan1979 Posted March 4, 2013 Share Posted March 4, 2013 Â In the Colors window, set the primary color's transparency-alpha to 0 (zero). Open up Tom's Code Lab and load SearedIce's Transparent Fade script. You can get Tom's Code Lab here:Â http://paintdotnet.12.forumer.com/viewt ... ight=#5120Â . You'll notice that the layer faded from transparent to opaque, top to bottom. If you would have set the secondary color's alpha to 0 and not the primary, the layer would have faded from opaque to transparent, top to bottom. OPTIONAL... before you click "OK" in Code Lab, go ahead and name the script (something like... TransparentFade), and click "Make DLL". This will save the effect .dll in the correct place (Program Files/Paint.NET/Effects) so the next time you load Paint.NET, it will show up under the "Effects" menu. After you made the .dll (if you chose to) go ahead and click "OK" in Code Lab. Â i can not find the item highlighted in red. does anyone have any ideas please Quote Link to comment Share on other sites More sharing options...
Red ochre Posted March 4, 2013 Share Posted March 4, 2013 Hi Alan, Take a look at the post 6 above yours by EER (this page) - and use the gradient tool on transparent mode. Hope that helps. Quote  Red ochre Plugin pack.............. Diabolical Drawings ................Real Paintings  Link to comment Share on other sites More sharing options...
Ego Eram Reputo Posted July 15, 2017 Share Posted July 15, 2017 Added PDF link Quote ebook: Mastering Paint.NET | resources: Plugin Index | Stereogram Tut | proud supporter of Codelab plugins: EER's Plugin Pack | Planetoid | StickMan | WhichSymbol+ | Dr Scott's Markup Renderer | CSV Filetype | dwarf horde plugins: Plugin Browser | ShapeMaker Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.